|
|||||||||||||||||||
|
Large Teeth (4.0mm, 4.5mm, 6.0mm)
Over 240mm saw with 4.0/4.5/6 mm gap between the teeth(L type) is
recommended for tree pruning for over 10cm diameter branches. Due to the distance between teeth, this saw works especially well for green wood and can also be used to cut dry timber.  Hardness: 900HV - 950HV (HRC 67 - 68 degrees) Impulse hardening: The razor sharp edges combined with impulse hardening make for the teeth that will last three times longer than conventional teeth and it is most suitable for cutting tough dry wood.
  Cross-section of saw blade showing relationship between blade and material being cut. Friction is minimized by the tapering of the blade.
 |
|||||||||||||||||||
|
|
|||||||||||||||||||
  |
