Large Teeth (4.0mm, 4.5mm, 6.0mm)
Large Teeth (4.0mm, 4.5mm, 6.0mm)
Over 240mm saw with 4.0/4.5/6 mm gap between the teeth(L type) is
recommended for tree pruning for over 10cm diameter branches. Due to the
distance between teeth, this saw works especially well for green wood and
can also be used to cut dry timber.
Impulse Hardened Teeth
Hardness: 900HV - 950HV (HRC 67 - 68 degrees) Impulse hardening: The razor sharp edges combined with impulse hardening make for the teeth that will last three times longer than conventional teeth and it is most suitable for cutting tough dry wood.
Friction Minimized
Cross-section of saw blade showing relationship between blade and material being cut. Friction is minimized by the tapering of the blade.